{"id":6525,"date":"2024-08-17T14:16:55","date_gmt":"2024-08-17T05:16:55","guid":{"rendered":"https:\/\/the-world-star.com\/?p=6525"},"modified":"2026-11-15T18:34:51","modified_gmt":"2026-11-15T09:34:51","slug":"diagnosing-a-faulty-ps4-controller-teardown-failure-analysis","status":"publish","type":"post","link":"https:\/\/the-world-star.com\/en\/games\/diagnosing-a-faulty-ps4-controller-teardown-failure-analysis-6525\/","title":{"rendered":"Diagnosing a Faulty PS4 Controller: Teardown &#038; Failure Analysis"},"content":{"rendered":"\n<p class=\"wp-block-paragraph\">I stopped by the famous Hard Off Kurume Kokubu store\u2014well-known on YouTube for the legendary staff member who performs one-man band covers using junk instruments\u2014and snagged a used PS4 controller for 2,200 yen.<br>I figured it was about time to retire my trusty PS3 controllers. Lately, my routine has been to test gamepads in the store by hooking them up to my smartphone. I hadn't brought my USB-C to USB-A adapter with me this time, but luckily there was a 100-yen Daiso nearby, so I ran over, grabbed one, and checked the controller. Riding that shopping high, I completely missed an issue and thought, \"Hey, works like a charm!\" I picked out the cleanest-looking unit on the shelf, but once I got home, I discovered that the Up and Right buttons on the D-pad were completely unresponsive. On the bright side, the analog sticks\u2014which are usually the first thing to drift or break\u2014were perfectly fine.<\/p>\n\n\n\n<figure class=\"wp-block-image\"><img loading=\"lazy\" decoding=\"async\" width=\"575\" height=\"1024\" src=\"https:\/\/static.the-world-star.com\/wp-content\/uploads\/2024\/08\/18141637\/dsc_72203545588032369580100-575x1024.jpg\" alt=\"\" class=\"wp-image-5134\" srcset=\"https:\/\/static.the-world-star.com\/wp-content\/uploads\/2024\/08\/18141637\/dsc_72203545588032369580100-575x1024.jpg 575w, https:\/\/static.the-world-star.com\/wp-content\/uploads\/2024\/08\/18141637\/dsc_72203545588032369580100-169x300.jpg 169w, https:\/\/static.the-world-star.com\/wp-content\/uploads\/2024\/08\/18141637\/dsc_72203545588032369580100.jpg 680w\" sizes=\"auto, (max-width: 575px) 100vw, 575px\" \/><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">Even though it was my first time opening a DualShock 4, I cracked it open right away to investigate. Once you get the hang of it, disassembly is surprisingly easy. Aside from the addition of the touchpad and light bar, it's essentially just a slight evolution of the PS3 controller. The L2\/R2 triggers had a redesigned shell, but the internal springs and mounting method were virtually identical to the PS3\u2014which gave me a good laugh.<\/p>\n\n\n\n<figure class=\"wp-block-image\"><img loading=\"lazy\" decoding=\"async\" width=\"575\" height=\"1024\" src=\"https:\/\/static.the-world-star.com\/wp-content\/uploads\/2024\/08\/18141637\/dsc_7218434102255591436083-575x1024.jpg\" alt=\"\" class=\"wp-image-5137\" srcset=\"https:\/\/static.the-world-star.com\/wp-content\/uploads\/2024\/08\/18141637\/dsc_7218434102255591436083-575x1024.jpg 575w, https:\/\/static.the-world-star.com\/wp-content\/uploads\/2024\/08\/18141637\/dsc_7218434102255591436083-169x300.jpg 169w, https:\/\/static.the-world-star.com\/wp-content\/uploads\/2024\/08\/18141637\/dsc_7218434102255591436083.jpg 680w\" sizes=\"auto, (max-width: 575px) 100vw, 575px\" \/><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">Those trigger springs snap all the time, don't they? And the reset switch up top looks pretty much the same, too.<\/p>\n\n\n\n<figure class=\"wp-block-image\"><img loading=\"lazy\" decoding=\"async\" width=\"575\" height=\"1024\" src=\"https:\/\/static.the-world-star.com\/wp-content\/uploads\/2024\/08\/18141637\/dsc_72244332267803333323414-575x1024.jpg\" alt=\"\" class=\"wp-image-5136\" srcset=\"https:\/\/static.the-world-star.com\/wp-content\/uploads\/2024\/08\/18141637\/dsc_72244332267803333323414-575x1024.jpg 575w, https:\/\/static.the-world-star.com\/wp-content\/uploads\/2024\/08\/18141637\/dsc_72244332267803333323414-169x300.jpg 169w, https:\/\/static.the-world-star.com\/wp-content\/uploads\/2024\/08\/18141637\/dsc_72244332267803333323414.jpg 680w\" sizes=\"auto, (max-width: 575px) 100vw, 575px\" \/><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">Probing around with a multimeter revealed that the ground (GND) lines for the D-pad contacts on the flexible circuit board are daisy-chained in sequence. The trace linking the Up and Right buttons checked out fine with solid continuity. By the way, the Right button is the final stop on this GND line.<\/p>\n\n\n\n<figure class=\"wp-block-image\"><img loading=\"lazy\" decoding=\"async\" width=\"575\" height=\"1024\" src=\"https:\/\/static.the-world-star.com\/wp-content\/uploads\/2024\/08\/18141637\/dsc_7223499021502704117596-575x1024.jpg\" alt=\"\" class=\"wp-image-5135\" srcset=\"https:\/\/static.the-world-star.com\/wp-content\/uploads\/2024\/08\/18141637\/dsc_7223499021502704117596-575x1024.jpg 575w, https:\/\/static.the-world-star.com\/wp-content\/uploads\/2024\/08\/18141637\/dsc_7223499021502704117596-169x300.jpg 169w, https:\/\/static.the-world-star.com\/wp-content\/uploads\/2024\/08\/18141637\/dsc_7223499021502704117596.jpg 680w\" sizes=\"auto, (max-width: 575px) 100vw, 575px\" \/><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">The culprit turned out to be the GND trace between the Up and Left directions\u2014zero continuity, completely open. You couldn't tell just by looking at it, though. When a trace breaks on a flexible printed circuit (FPC), replacing the whole sheet is usually the only real fix. Bridging it with a soldered jumper wire crossed my mind, but adding solder there would likely interfere with the rubber conductive pad. Besides, I've never soldered on flexible film before; it'd probably just melt.<\/p>\n\n\n\n<figure class=\"wp-block-image size-large\"><img loading=\"lazy\" decoding=\"async\" width=\"1024\" height=\"575\" src=\"https:\/\/static.the-world-star.com\/wp-content\/uploads\/2024\/08\/22182103\/wp-17243184589407136521456923348212-1024x575.jpg\" alt=\"\" class=\"wp-image-5143\" srcset=\"https:\/\/static.the-world-star.com\/wp-content\/uploads\/2024\/08\/22182103\/wp-17243184589407136521456923348212-1024x575.jpg 1024w, https:\/\/static.the-world-star.com\/wp-content\/uploads\/2024\/08\/22182103\/wp-17243184589407136521456923348212-300x169.jpg 300w, https:\/\/static.the-world-star.com\/wp-content\/uploads\/2024\/08\/22182103\/wp-17243184589407136521456923348212-768x432.jpg 768w, https:\/\/static.the-world-star.com\/wp-content\/uploads\/2024\/08\/22182103\/wp-17243184589407136521456923348212-320x180.jpg 320w, https:\/\/static.the-world-star.com\/wp-content\/uploads\/2024\/08\/22182103\/wp-17243184589407136521456923348212.jpg 1210w\" sizes=\"auto, (max-width: 1024px) 100vw, 1024px\" \/><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">Later on, when I pulled the sheet out during the replacement repair to inspect the back (the D-pad is on the right side in this layout), the break was still completely invisible to the naked eye. Looking really closely at the GND trace around the Left button, it felt like there might be a tiny hairline crack near the circular contact, but it was impossible to say for sure.<\/p>\n\n\n\n<figure class=\"wp-block-image\"><img loading=\"lazy\" decoding=\"async\" width=\"575\" height=\"1024\" src=\"https:\/\/static.the-world-star.com\/wp-content\/uploads\/2024\/08\/18141637\/dsc_72223080500324783160974-575x1024.jpg\" alt=\"\" class=\"wp-image-5133\" srcset=\"https:\/\/static.the-world-star.com\/wp-content\/uploads\/2024\/08\/18141637\/dsc_72223080500324783160974-575x1024.jpg 575w, https:\/\/static.the-world-star.com\/wp-content\/uploads\/2024\/08\/18141637\/dsc_72223080500324783160974-169x300.jpg 169w, https:\/\/static.the-world-star.com\/wp-content\/uploads\/2024\/08\/18141637\/dsc_72223080500324783160974.jpg 680w\" sizes=\"auto, (max-width: 575px) 100vw, 575px\" \/><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">Then another crisis hit: after opening and closing the shell two or three times, the contact pins on the edge of the ribbon cable connecting to the USB and LED board started peeling off! That was alarming. I carefully glued the strip back down with gel superglue and held it in place with masking tape, which thankfully seemed to salvage it. Definitely not something I can keep doing. Online teardown guides claimed you just yank the ribbon cable out and shove it back in when reassembling, but really? Do that a few times and peeling is bound to happen. (*While I'm still not certain about that specific port, the ribbon connector for the touchpad definitely features a locking latch mechanism that can be safely toggled open and shut.)<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Next time: the repair process!<\/p>\n","protected":false},"excerpt":{"rendered":"<p>I stopped by the famous Hard Off Kurume Kokubu store\u2014well-known on YouTube for the legendary staff member who performs one-man band covers using junk instruments\u2014and snagged a used PS4 controller for 2,200 yen.I figured it was about time to retire my trusty PS3 controllers. Lately, my routine has been to test gamepads in the store [&hellip;]<\/p>\n","protected":false},"author":1,"featured_media":5136,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_locale":"en_US","_original_post":"https:\/\/175.41.248.22\/?p=5138","_lightning_design_setting":{"layout":"default"},"footnotes":""},"categories":[371],"tags":[961,1060,1109,1110,1111,1112,1113,419,420,421,835,892],"class_list":["post-6525","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-games","tag-troubleshooting","tag-nintendo-switch","tag-gamepad","tag-switches","tag-thumbstick","tag-flexible-pcb","tag-d-pad","tag-ps3","tag-ps4","tag-ps5","tag-gaming","tag-controller","en-US"],"_links":{"self":[{"href":"https:\/\/the-world-star.com\/wp-json\/wp\/v2\/posts\/6525","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/the-world-star.com\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/the-world-star.com\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/the-world-star.com\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/the-world-star.com\/wp-json\/wp\/v2\/comments?post=6525"}],"version-history":[{"count":1,"href":"https:\/\/the-world-star.com\/wp-json\/wp\/v2\/posts\/6525\/revisions"}],"predecessor-version":[{"id":6526,"href":"https:\/\/the-world-star.com\/wp-json\/wp\/v2\/posts\/6525\/revisions\/6526"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/the-world-star.com\/wp-json\/wp\/v2\/media\/5136"}],"wp:attachment":[{"href":"https:\/\/the-world-star.com\/wp-json\/wp\/v2\/media?parent=6525"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/the-world-star.com\/wp-json\/wp\/v2\/categories?post=6525"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/the-world-star.com\/wp-json\/wp\/v2\/tags?post=6525"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}