Kawachi Dam: Landing a 53cm Bass on My Homemade Crankbait Prototype

With the weather cooling down, I decided to check out Kawachi Flood Control Dam. I took it easy—woke up just after 6:00 AM, started fishing right before 7:00, and landed one around 7:30. Believe it or not, despite going there many times, this was my very first time actually catching a fish at Kawachi Dam!

It measured in at 53 cm—a gorgeous, magnificent bass. Once landed, it thrashed around like crazy and really made it tough to snap a good photo. The lure was one of my own creations: an unpainted mass-production Prototype No. 1, which was still in the swimming-test phase.
Compared to the original wooden prototype, its action wasn't as nimble, which had me a bit worried. But when retrieved slowly, it fluttered nicely. The weight-transfer system kept sticking or throwing off the balance, giving it a really erratic action—which turned out to be quite intriguing! I realized, 'Ah, this lure just needs this specific speed.' Fascinated by its unique character, I kept casting and retrieving. Then, near a submerged tree close to the bank, I felt a subtle, smooth bite. I paused, focused, and saw the line slide smoothly to the right. 'Here it comes!' I thought, raising the rod sharply—fish on, and it felt heavy.
It pulled away from the tree right away. It put up a bit of a fight, but since it was close, I got eyes on it quickly. Once you turn a bass's head toward you, the battle is pretty much won. It glided right over to me, and I dragged it up onto the overgrown grass. Even after I gripped its jaw, it thrashed hard and threw the hook! Luckily, we were basically on the bank, so I secured it around the gills with both hands and brought it onto dry land. That was a close call.

At 53 cm, this marks a new personal best for me. Lately, it seems like whenever I land a fish, it's always a 50-plus—usually around 52 cm.

Here's a close-up of my handmade lure. Originally, the lip was made of UV resin, but I couldn't get it attached completely straight. So, I switched to an aluminum lip, allowing me to make on-the-spot adjustments in the field. Catching fish or taking hits bends the shape, so you have to re-tune it. While that wouldn't fly for a commercial product, it's unbeatable for personal DIY use. I made the lip slightly longer to get more depth, but as I was retrieving it, I was thinking this fat-frog profile might actually be best with a shorter lip strictly for shallow water.
Since it caught such a beast, maybe I shouldn't mess with it any further, skip the paint job, and just retire it straight into the Hall of Fame. I might just paint a victory mark on it instead.

Back left is Prototype 1, the 'data collector'—this one has the best action. Back right is Mold Machine No. 2. And in the front is Mass-Production Prototype 1, which had a bit too much resin. It originally had an add-on UV resin lip, but since it didn't swim straight, I swapped it for aluminum. The one that caught the bass today was Mass-Production Prototype 2, the lightweight version—though it's still fairly heavy.

The weight is designed to shift, but it unintentionally gets stuck or leans to one side inside the body. Turns out, that quirk is the secret behind its unpredictable, irregular action.

After that, this butterfly started hanging around me. It would sip moisture from the weeds stuck to my rod and wouldn't even fly away when I swung the rod around. When I took a break, it even landed on my hand... what an endearing little creature.

Perhaps due to the intense sunlight, Kawachi Dam had a massive phytoplankton bloom. The entire water looked greenish like an old pond, with blue-green algae covering certain spots. I had actually come after hearing rumors that popping through the algae scum with a popper and letting it sit would trigger bites. Unusually, the reservoir was completely topped out at maximum capacity.
However, thinking it would be hot, I wore sandals. Visiting Kawachi Dam after a long time, the vegetation was wildly overgrown. I hesitated to climb down from the dam embankment, so I tried entering from the campsite side in the back, planning to take an easier route down by the rocky point (which was submerged due to full water). Still, the thick brush made it quite a struggle. Once down, nothing looked normal—trees along the shoreline were drowned, with only their tops poking out. My excitement dwindled, so I figured I’d just test out my handmade lures for a bit and head home.
On this mountain side, there was no algae scum, so the 'algae popper' tactic wasn't an option. Instead, I switched between a few crankbaits I was tuning. Finding the right answer and landing a great fish made it an absolute win.
Right at the very end, that prized handmade lure got snagged near the bank. Frustrated, I stripped off my pants and waded in to rescue it. Standing directly above the snag, the water was surprisingly deep, but pulling straight up popped it right free—it had hooked into some thick underwater weed.

