Reviving a Broken PS4 Controller: DIY Ribbon Cable Repair

English

In my previous post, I documented my troubleshooting process after finding out the D-pad on a secondhand PS4 controller I picked up at Hard Off wasn't working. Figuring it was a snapped ribbon cable, I ordered a replacement flex board on Amazon and got down to repairing it. While a few other unexpected hiccups popped up along the way, I'm happy to report it has made a full recovery!

This is the replacement flex board I purchased. There are several different versions available. Even though many look nearly identical and it's easy to second-guess yourself, you just need to match it to the motherboard model of your PS4 controller.

The model number is printed directly on the PS4 controller's board—mine was "JDM-001." You won't know which one you have until you open the shell, so be sure to take notes or snap a photo when taking it apart. It cost me just 419 yen for the cheaper option.

The part arrived inside a small plastic bag along with a cleaning cloth. Did I really need a cloth? Who knows, but I still ended up using it to wipe things down as I put everything back together.

Here's what it looks like out of the bag. At first, I scratched my head a bit over how to remove the original ribbon cable, but with a little gentle maneuvering, it came right off. Swapping in the new one was straightforward, and the shape looked spot on.

Once reassembled, the D-pad was working again! Just when I thought I was in the clear, the touchpad (which acts like a mouse pointer) started acting bizarrely. The cursor was glued to the left side and completely unresponsive—even though it worked fine right after I bought it, making me think, "Hey, I could actually aim with this!" Taking it apart once more to investigate, I discovered the ribbon cable connecting the touchpad was trashed... About four traces were peeled back, and another was bent and snapped clean in two. I had followed a teardown guide online that claimed you just yank the cable out and force it back in. I had my doubts at the time, and sure enough, that advice was dead wrong. You have to flip up the connector's black locking latch to release the tension first. Forcing it in blindly will ruin it every single time. Wondering how to fix it, I saw that generic flat flex cables are readily available on Amazon in various pin counts and sizes. Since the pitch is identical, I considered buying a wider one and trimming it down to size. But then I thought, "Wait, what if I can salvage this one if I strip it back properly?" So, the route I chose was...

Trimming the cable straight across to match the shortest pin!

I was worried I might have cut off a bit too much, but it ended up working like a charm.

And just like that, the controller is back to 100%!