Installing a Rear Rack on a Road Bike for Bicycle Camping

English

Inspired by the anime Laid-Back Camp, I've been wanting to try out bicycle camping for a while now, especially since there are free campsites you can use if you arrive on a bike.

So, I decided to install a rear cargo rack on my road bike—which is built for speed—so I can haul all my camping gear around.
Sure, I could just wear a backpack, but I want to make the ride as comfortable as possible.

What I Bought

I went with this: the Minoura MT-800N, which cost 2,418 yen on Amazon. Is it a Japanese brand? It has that standard, old-school commuter bike look to it. I like it because it gives off a lightweight impression.

I was tempted by cheaper alternatives that mount to thick aluminum seatposts, but they looked way too bulky and a bit too heavy. Plus, judging by the sketchy manufacturing and what looked like Chinese imports, they seemed prone to welding flaws, so I gave them a miss.

If you want quick-release functionality, you'd want to choose a different style. That type is great if your main focus is riding your road bike fast, like exploring from a campsite base or entering races. But since my bike is dedicated strictly to camping gear, I don't need quick-release—in fact, I prefer something sturdier, which is why I chose Minoura.

That said, the Minoura rack I bought had some rough welds and messy paint drips, so maybe quality control is pretty much the same across the board. The great thing about Amazon is that you can return things immediately if you aren't satisfied, so you don't really have to worry about quality—if you get a dud, you just exchange it. I didn't bother returning mine this time because I wanted to get it installed ASAP.

Let's take a closer look at what I bought. Here's the main frame. The side guards for the wheels are nice and large, which looks like it'll be great for hanging big pannier bags on both sides. That was actually the deciding factor for my choice.

And here are the accessories: screws, a cheap tool (which I don't need), the front stays, and their mounting clamps.

Figuring Out the Installation As I Go

Putting It Together for a Test Fit

I had planned from the start to attach the mounting clamps lower down. I quickly threw it together in the bicycle parking area just to see how it looks. Right now, I'm trying to figure out whether to buy a specific seat-cluster mount or just use this rack's clamp-based system. It's a totally spur-of-the-moment, fly-by-the-seat-of-my-pants strategy. But hey, that's the beauty of Amazon shipping things so fast!

The part mentioned above lets you connect stays to the seatpost for this rack. It looks like it would make quick-release easy. But since the rack side isn't quick-release, it feels half-baked—and honestly, kind of flimsy.
Other manufacturers make them too.

I was actually debating buying this one instead.

Planning the Mounting Strategy

Since this looked like it was going to be a long project, I brought the bike inside my room. Here’s a collaborative photo of my Shimano fishing gear and my Shimano-equipped road bike.

I could probably make this setup work as-is, but I keep my saddle pretty low for city riding, and I also have a pouch for flat-tire repairs strapped underneath it. I want to keep using that pouch, but there's no space for it right now. I need to offset the rack backward. For the lower mounts, I can use aluminum stays to extend it backward. As for the front, there’s no way it’ll reach the seatpost in this configuration. So, it’ll probably be better to mount the front ends to the two seatstays supporting the wheel using clamps, just like this rack was originally designed to do.

Rummaging through my drawers—like anyone usually does—I found some flat aluminum stock that every household apparently has lying around, along with some nicely pre-drilled aluminum pieces I had left over from when I custom-made a reel handle. I decided to test-fit them.

Installation Step 2: Offsetting with Aluminum Stays

Looking good. This is the direction I'm going with. For the front end, I took a piece I had previously bent for a reel handle and hammered it flat again.

As for the upper clamps, you can buy them on Amazon, but they turned out surprisingly pricey at around 1,000 yen for a pair. Instead, I went to Handsman (a home center) and bought a clamp meant for securing household hoses or something. Since it was too big, I Frankensteined it into a custom clamp of just the right size. Getting carried away, I even painted it with black primer. I'll skip the details, but this part was a bit of a struggle. I thought I had measured the diameter and taken photos, but my mistake was guessing and buying one without checking properly when I thought I couldn't find the right size. I bridged the tiny gap by making it work with some spacers I had at home.

I ended up making a few trips to Handsman and actually found the perfect clamp: a stainless steel single saddle bracket (1822S) for just 58 yen. But in the end, I didn't even use it. This photo shows me testing out whether I should move the aluminum bar to the lower frame struts.

It offset backward exactly as I envisioned, and I can just barely still use my old pouch.
I could technically use the original round screws for the lower mounts of the rack, but I wanted to keep the rack sitting lower and keep the aluminum stays horizontal, so this is how it ended up for now.

I do have one issue though: as you can probably tell just by looking at it, if you put a lot of heavy weight on it, each stay is going to pivot, causing the back of the rack to drop and rub against the tire. I needed to think of a clever workaround for this problem.

Installation Step 3: Making It Load-Resistant

Adding another set of stays or locking part of the existing stays in place should do the trick. I considered various ideas, like running an aluminum strip along the lower strut to lock things down, but I happened to have a thin piece of aluminum plate lying around, so I decided to use that to make a brace rod. This lets me keep the current shape. The distance from the center of the stay hole to the end is 93mm. I fitted both the left and right sides by eye using the actual parts. For the screws, I used my go-to M5 size. It's best to keep hardware uniform so you need fewer tools. After drilling the holes, I cut the piece to size with a hacksaw.

It worked great as a brace rod and locked everything securely in place. I was a bit worried about scratching the frame and thought about slipping some rubber in between, but honestly, this rock-solid setup is good to go.

I built both sides and got it fully equipped. It's perfection.

Also, I was planning for the stays to be temporary, but it's too much of a hassle now so I'm just going to leave them as-is. And with that, it's complete.
Here's a commemorative photo with my most expensive fishing reel—the Twin Power SW 14000—paired with a Grappler casting rod.

The Tail Light

This rack actually has a designated spot to mount a tail light. I used to have mine attached to the rear seatstay, but it gets blocked once you strap bags onto the bike, so it really needs to go at the very back. The original mounting bracket was already broken anyway, so combined with that, installing it here should be pretty straightforward.

The mounting angle didn't line up out of the box, so I bought an L-bracket to attach it. This photo is just a quick reminder memo for when I went shopping.

And ta-da! With the tail light installed, the whole project is finished to perfection.
Also, during the long Obon holiday, it was too windy to go fishing and I was dying of boredom, so I ended up removing rust from various parts, replacing screws with brand-new ones, and even swapping out this rusty chain you see in the photo. I'll write another post about that later!

Leave a Reply