Tire Replacement: Dunlop Direzza ZIII
My new car's factory tires lasted a full 7 years—though to be fair, I haven't been driving it all that much. After failing the vehicle inspection and hearing that tires were reaching their limit and prices were going up in April, I decided it was finally time for a change. I went with the Dunlop Direzza ZIII, coming out to a total of 85,360 yen including installation fees.
My factory tires lasted so long that it's been at least 7 years since my last tire replacement! Back when I drove my old S15 Silvia, I used to order online from Hirano Tire Shokai and take them to a small garage deep in Chikushino to get them mounted. Back then, that was the cheapest way to do it. Debating between Yokohama's Advan Neova (which I'd always bought) and Dunlop's Direzza (which I've been hearing great things about lately), I decided to head out on Route 3 to just look around... and I ended up finding a great shop.
The shop is A-One in Onojo. It looked like a cheap place dealing in used tires, and when I walked in, I felt a bit out of place and almost turned around. But then a super friendly guy came over to talk to me, and since he was so nice, I asked for a quote. It turned out to be really cheap! The Direzza was priced the same as on Amazon, and the Neovas were practically the same price. Figuring I'd do a bit more research, I stopped by Yellow Hat and Autobacs to check their prices. The Neovas were reasonably priced because Yokohama seems to be discounting their sports tires right now, coming out to about the same. However, the Direzzas were at standard retail price—about 1.5 times as much. So, I immediately headed back to A-One and placed the order. I hesitated for a moment, but my mind was already set on the Direzza ZIII, especially after seeing Dunlop's website featuring track tests with the ND Roadster. Decision made.

Here's what their pit looks like. The customer waiting room looked a bit cramped, so I just hung out right in front of the bay to watch the work, and I have to say, they were very meticulous. After snugging the lugs by hand, they used an impact wrench, and finally lowered the car to do a final torque check with a torque wrench. When I do it myself, I'm a bit more careful, spinning the tire as I tighten to make sure it's properly centered, but they're pros, so I'm sure it's dead-on.
Whenever I get my car back from the dealership after an inspection, I always re-torque the wheels myself. Because they just blast them on with an impact wrench and aren't great at mounting wheels, the center isn't quite right, which results in a harsh ride. It probably ruins the grip, too. This goes for my Nissan as well as my Mazda.

The new tires are Dunlop Direzza ZIII—high-grip track tires. I don't even go to the track, and I'm still amazed by the grip of the factory tires (especially since the car is so light), so I honestly wondered if I really needed these. But let's be real, sports cars just look cooler with tires that have fewer grooves! Unlike the Neovas, these have a symmetrical tread pattern. Also, they were cheaper than I expected: 17,800 yen per tire for 195/50/R16. Back when I had my S15, I was running low-profile 17-inch tires like 225s, which must be why they were so expensive. Looking at it now, there's a 10,000 yen per tire difference just between 16-inch and 17-inch sizes! Plus, the labor for 16-inch tires is cheap at 800 yen per tire, compared to 1,500 yen for 17-inchers. Roadsters are surprisingly reasonable.

Here's a look at the shop's vibe. They were working on another customer's car here too, hoisting it up with a manual hydraulic floor jack just like an amateur would do it. They only have a one-car pit, so it looks like they handle the second car using this setup.

Here are the old tires. They still had about 2mm of tread left, so they might have been usable, but I replaced them because I noticed strange cracks—probably from failing to handle the load properly. I've been really leaning on the shoulders when cornering, so both outer edges are completely worn down and rounded off.

Cracks right down in the tread grooves.

This is pretty bad. Even though it's an FR car, the front tires wore out faster than the rears. I love carving through winding mountain roads, so I tend to drive by transferring weight to the front and cornering while keeping the tires loaded. I thought I was driving smoothly and taking corners effortlessly, but I guess it puts a lot of stress on the tires. Could they be cracking because factory tires are essentially eco-tires? Well, 7 years of aging definitely played a part too.

I figured the outside of the front tires would be worn out because of my driving style, but surprisingly, the inside edges were worn slightly more. That's pretty common for daily-driven sports cars, though. I've lowered the ride height myself ever since buying the car using the factory dampers, which gives it a nice subtle camber, so the inner edges wear faster since most of my driving is probably in a straight line.

Seeing the factory Bilstein suspension for the first time in 7 years. Up front, it's a double-wishbone setup—very luxurious! That also made taking them off quite a pain, if I recall correctly. Those horizontal surface scratches on the rust are probably from when I adjusted the ride height myself right after buying the car. I remember it being a huge hassle because they use a C-ring style rather than full-length ride height adjustment. The S15 had strut suspension, which was simple and easy to swap out. I think Imprezas and stuff also used struts to prioritize ease of replacement. As a car-modding hobbyist, I preferred the simplicity of strut setups, but I don't really mess with that stuff anymore, so it's fine. The suspension arms also look like cast parts. The S15 used mostly pressed steel, which made me realize just how amazing Japanese car manufacturing is for building things affordably. Is Nissan just that incredible, or is the Roadster just overwhelmingly generous?

Here's the rear. A multi-link setup. Visually, it looks pretty simple: three arms with the shock absorber mounting lower down.
I hadn't really checked the rotor wear, but looking at the photo, it seems fine. Back in my S15 days, I was tracking the car so hard I had to replace them every couple of years. Will changing the brake pads make them wear down faster again?

Here's what it looks like with the new tires on. The suspension extends quite a bit when unloaded.

Back down on the ground.

From the side. Hard to tell any difference.

Does it look cool? Only hardcore car enthusiasts would really notice, I guess.


