DIY Prop Popper: Building Production Model #1
Next up is building Unit #1! Since Unit #0 was just a prototype to test the build process, this is officially the first true production model. And because it's Unit #1, it belongs to my eldest son, Ichi. As with the previous build, I’m sticking with Daiso's 100-yen UV resin. He requested pink—he probably imagined […]
Field Testing My DIY Resin Lure
First, I tested it in the bathtub and confirmed it floated almost completely upright like a diving pencil, so I rigged it with hooks and headed down to the local river for a swim test. Yep, standing straight up. Vertically, it moved nicely just like a diving pencil, throwing up a great splash even on […]
DIY Hollow Lures with Dollar Store UV Resin: Prototyping for Mass Production
I bought a UV LED resin curing light at Daiso for just 300 yen. My local Daiso was sold out, but they had tons of them at the Hakata Station Bus Center shop. It works surprisingly well! The resin is 300 yen for 20g. According to my daughter, 100-yen store resin tends to discolor and […]
Tying Leaders to Braided Line with the FG Knot
Connecting my leader to the braided line using an FG knot. If you don't retie once in a while, both the braid and leader get worn down, so I re-rigged two of my bass setups today. I just use my rod and hands. First, cut off and discard a few meters of braid along with […]
Kuboshiro Dam: Fishing with Prop Baits
I headed out to Kuboshiro Dam. Even though I arrived at 5:00 AM sharp, someone was already parked at my target point on the point... Dawn doesn't even break until 5:30! It was dead quiet, so maybe they camped out the night before and were sleeping? I keep losing this early-bird race and haven't been […]
Making a DIY Replacement Shoulder Harness for My Backpack Brush Cutter
Caked in 2-stroke oil, impossible to wash the stench out of, completely frayed, and having snapped once before—my brush cutter's shoulder strap was beyond saving. I went hunting around a 100-yen shop for anything that looked useful, and in the end, I managed to rebuild the entire harness using only 100-yen store supplies. For the […]
Urban Bass Fishing Around Takeshita Station on the Naka River with a Multi-Piece Rod
Determined to head home early today, I packed a multi-piece rod and a box of lures in my bag and headed to work. I cast a few lures around the Takeshita Station area. The water is shallow almost everywhere—if there were any bass around, you'd probably lock eyes with them. While fishing under a bridge […]
Kuboshiraku Dam Bass Fishing Then & Now: The Weeds Have Moved Deeper!
At Kuboshiraku Dam, the weed beds have shifted much deeper compared to the old days. Today, I'm going to break down why this is happening. Back around 20 years ago, I used to bass fish at Kuboshiraku Dam whenever the mood struck. Every little cove was choked with thick weed beds, making it an easy […]
Machining the Input Shaft for the Motorized Kayak
Up until now, I've just been using a temporary M5 x 60mm bolt for the input shaft. I originally tried to clamp a stainless steel long parallel pin in a vise to cut some threads, but the stainless steel was way too hard, so I gave up on thread-cutting and opted to chop the head […]
Building the Gear Unit: DIY Kayak Motorization Project
Started detailed design using a friction wheel and pulley system. Detailed Design Realizing I needed precise measurements for clearances and exact positioning, I decided to draw up full-scale blueprints using Excel. Who knew you could actually do 2D CAD in Excel? There were online 3DCAD tools available, but they felt like overkill for this. The […]










