Handmade Lures
DIY Resin Lure: Testing a Lipped Prototype

Using my mass-produced Giant PopMax base, my goal here is to create something like a lipped minnow or a prop darter. The material of choice is UV resin. And it's done. The face is tapered to cut cleanly through the water. It’s just a rough build to evaluate the shape, so the sculpting isn't overly […]

Read more
Handmade Lures
DIY Hollow Lures with Dollar Store UV Resin: Prototyping for Mass Production

I bought a UV LED resin curing light at Daiso for just 300 yen. My local Daiso was sold out, but they had tons of them at the Hakata Station Bus Center shop. It works surprisingly well! The resin is 300 yen for 20g. According to my daughter, 100-yen store resin tends to discolor and […]

Read more
ND Miata
ATOTO S8 Head Unit Installation Guide: Complete Summary

Now that all the articles for the ATOTO S8 head unit installation are complete, I've put together this summary page with links to each guide.The car used is an ND Roadster (MX-5). ATOTO S8 Product Review ATOTO S8 Installation Guide: Parts 1–6 OBD2 Setup You can connect to the ATOTO Android head unit via Bluetooth. […]

Read more
ND Miata
Installing the ATOTO S8 Navigation System Part 6: Setup Version 3

The side brackets were too bulky and looked awkward, so I rummaged around the house and found some nice universal brackets to use instead. The size is just right, too. Man... did you transcend time just so I would buy you all those years ago for this exact moment? After installation. It looks great now […]

Read more
ND Miata
Installing the ATOTO S8 Head Unit Part 5: Mounting Ver. 2

To fill the gaps... I'm going to use the original plastic base. I drilled a ton of holes in it for the wiring. I could keep it reversible if I didn't drill, but I just went for it! Besides, buying an OEM replacement part shouldn't be that expensive anyway. Being able to bring the part […]

Read more
ND Miata
Installing the ATOTO S8 Navigation System Part 4: Installation Ver. 1

This is Version 1. The final setup is Version 3, but if you're interested, enjoy the journey of getting there! As I was wondering how to mount it, it suddenly hit me: couldn't I just reuse the bracket that was connected to the factory unit? I also attached the 2DIN mounting bracket that came with […]

Read more
ND Miata
Installing the ATOTO S8 Head Unit Part 3: Temporary Setup & Power Test

Continuing our series on installing the ATOTO S8 head unit! In this post, we'll cover everything from removing the factory audio system to trial-and-error placement of the ATOTO unit. Here is the starting point for this series. Temporary Setup Time to strip away the interior panels. I skipped taking photos of the process, but you […]

Read more
ND Miata
Installing the ATOTO S8 Head Unit Part 2: Wiring & Modifications

This article covers the wiring modification process. Check out the previous article here. Here is a photo of the accessories from the last post. We'll be modifying the universal harness included in the kit. One of the harnesses (on the left) is for Toyota. If it fit out of the box, life would be easy […]

Read more
Kayak Motorization
Machining the Input Shaft for the Motorized Kayak

Up until now, I've just been using a temporary M5 x 60mm bolt for the input shaft. I originally tried to clamp a stainless steel long parallel pin in a vise to cut some threads, but the stainless steel was way too hard, so I gave up on thread-cutting and opted to chop the head […]

Read more