Installing the ATOTO S8 Head Unit in My Roadster: Part 1 – Purchase & Unboxing

English

It was already a year ago, but I want to look back at the process of installing my ATOTO Android head unit using photos. Working on the car is so much fun that writing blog posts always gets pushed to the back burner, and before I know it, I've missed my chance. Facebook is easy to post on because you don't have to overthink it, so I usually just write casually there and sometimes copy-paste those thoughts into an actual article. I wonder how many parts this series will span?

Buying the ATOTO Head Unit

First, you can check out my post-installation impressions right here.

In this post, I'll be talking about everything leading up to the installation.

My Roadster is an NR-A, which is a circuit-focused model. When I bought it at the dealership, I could only choose the base segment audio system—a built-in navigation system wasn't even an option. Plus, Mazda cars use a proprietary audio layout, meaning standard aftermarket navigation units usually won't fit. I used to connect a Bluetooth receiver for cars to the AUX port to stream music from my smartphone and use Google Maps, but I really wanted a backup camera. At the same time, I didn't want to clutter the interior with a bunch of extra displays, so I decided to install a proper head unit. That's why I chose this one.

What I Bought

The head unit itself, a camera, a Mazda-specific wiring harness, and a radio antenna cable which I added later.

The model is the S8 Premium (New), featuring 3GB of RAM and 32GB of flash storage. It's the most basic spec, but since I'm not planning to play games on it, it's totally fine.

When I bought it a year ago, it cost 36,999 yen—the price seems to be about the same now. If I recall correctly, this model supports a single-camera virtual surround-view, and the screen is crisp and clear, which is important because display quality really changes the sense of luxury. I agonized a lot over whether this was the right choice. It's a 2-DIN unit, but looking at the specs, the rear chassis looked almost like a 1-DIN size and was super slim. I figured it would fit right into the original segment audio slot, and the physical volume and track-selection dials seemed like they would be much easier to operate while driving. That's why I went with this model.

The dedicated camera costs 7,999 yen. It's pricey, but since it enables virtual surround-view with just a single camera, it works exclusively with the factory camera. It comes with a calibration cloth. Whether it automatically detects the connected camera or not, third-party cameras won't unlock the surround-view calibration mode.

The Mazda-specific wiring harness was 2,250 yen.

Finally, as another bare minimum requirement, I needed a radio antenna cable adapter. For some reason, you can't buy these on Amazon—only genuine OEM versions are available. You can probably get it cheaper directly from a dealership, but around that time I had just moved (or rather, moved back) and felt awkward asking a dealership I wasn't familiar with yet. So, I ended up buying it on MonotaRO. MonotaRO actually carries OEM parts! Because getting ahold of it was a bit of a hassle, I ended up installing it later on.

Though it's an affordable import Android unit, it functions just like a smartphone with car audio input/output interfaces. It can operate completely independently of your phone, letting you install Amazon Prime and pretty much anything else. Since it runs on Android, I can even write my own software and install it if needed. You can connect an OBD2 scanner via Bluetooth. It achieves a virtual surround-view monitor using just a single backup camera. Honestly, it's the ultimate unit for me, boasting unbeatable features and expandability—my one and only choice for a head unit. Or rather, a central vehicle controller. Plus, it's cheaper than standard navigation systems.

Unboxing

Let's open it up and see what's inside.

I've taken the main unit out of the box. Yep, just as expected. This size and the physical jog dials are definitely great.

The sides are so thin! Well, on the inside, it's basically a beefy smartphone, so I suppose this is to be expected. Because of this slim profile, it should fit into practically any car. It really makes you feel like the size of the factory radio and AUX-only audio units is absurdly oversized.

The back panel. It has various familiar audio-related terminals and ports. There's a heatsink-like fin attached, but wouldn't a larger one be better? Does it even do anything? Well, being able to connect directly to car-specific interfaces is a major advantage that smartphones just don't have.

The included accessories: mounting metal plates for a 2-DIN slot and the wiring harnesses. There's a WiFi antenna, USB cables, a microphone, and two types of vehicle wiring harnesses. One of the harnesses (on the left) is for Toyota. If your car matches that, installation is a breeze with a simple plug-and-play. You could probably just cut the coupler off this one, but the other harness (on the right) is a generic type without a pre-attached vehicle coupler, making it much easier to modify. Since I drive a Mazda, I'll be using this one.

The 24-pin audio harness for Mazda that I bought separately. I assume whether you need this or not depends on whether your car is an older or newer model. Just like the old days, it uses bullet connectors.

Power-On & Initial Testing

I didn't want to install it in the car only to find out it wouldn't turn on, and initial setup is much easier when connected to home WiFi. So, I decided to test and boot it up right in my room.

The power source is a car battery charger I bought quite a while ago...

And they're still selling it! Was this thing always this expensive?
I didn't take a picture of this step, but by using the included generic harness and connecting the ground wire to ground, the constant 12V power line, and the accessory 12V line, it should power right up.

Since I wanted to test the audio, I connected a cord that I believe came from an old home stereo system. Since this connects to audio equipment, it has male ends. You could plug it straight into a smartphone, but I wanted to check the sound using headphones. I repurposed a dual-headphone adapter I had lying around—using it backward as a female-to-female coupler—to connect the head unit to my headphones. That way, I could easily check the audio output.

Booting up! Oh, nice! The Google logo appears.

Boot sequence complete. The icon layout is clean and easy to look at.

Launching Google Maps! Since it isn't connected to the internet yet, no map is displayed, but it launched successfully. That's awesome. Next, I tapped the gear icon to open the WiFi settings and connected it to my home network. The interface is practically identical to a smartphone, making it very intuitive.

Alright, the map is rendered and navigation is ready to go. The display looks gorgeous. 152 km away... where is that? Hirado's Ikitsuki Island?

The upcoming verification steps shown below were actually performed after completing the "wiring modification" phase covered in the next article. For now, just take a look at the initial boot check.

Next up is testing the backup camera. Oh! The parking guide lines and surround-view monitor just popped up! It recognizes the factory camera automatically. Everything is going smoothly with zero issues.

As for the wiring details... if I recall correctly, it involved connecting the video signal terminal to the camera, supplying 12V to the camera's power line, and feeding a 12V signal into the head unit's reverse trigger input. Since I'll be utilizing the reverse sensor signal for a few different things after the upcoming "Wiring Edition," I currently have two wires rigged up to accept connections. In this photo, you can see three wires inserted, connecting four lines total. I must have fed 12V directly into the Back Sensor On wire right here.

In this image, I tried installing and launching TVShow (or whatever that Sony NASNE TV recording app is called). While it launches and runs, trying to play back recorded shows from the Nasne results in an error suggesting the device has been rooted, causing it to fail. And indeed, this Android head unit seems to be rooted out of the box—probably due to some specific requirements for automotive integration. Apps like TVShow often block playback on rooted devices to prevent copyright protection bypassing. Oh well, what a shame. By the way, Amazon Prime Video and Music work just fine. Since those run entirely over the internet, they probably pass the check. After this, I went ahead and updated all the pre-installed apps while downloading a bunch of other ones I thought I might need.

That wraps it up from unboxing to initial startup testing. Next up: the wiring modification guide!

Leave a Reply